1.25Gb/s GE-BX80-SM1550S 80Km 1550/1490nm SC BiDi SFP Transceiver Compatible with Cisco SC Duplex SMF DDM Optical Transceiver Module
Compatible:
Cisco, Huawei, Arista, Juniper, HPE/Aruba, Dell, H3C, Ruijie, ZTE Nokia, Ericsson Extreme, Allied Telesis, NETGEAR, D-Link, TP-Link, MikroTik Finisar, Fortinet, Palo Alto Networks, Generic, Customized
Factory direct price
23 years of manufacturing expertise
100% detection
Each module is 100% tested
Technical Support
Professional free technical guidance
Spot stock
Always in stock, short delivery time
-
Product Description
100Glight GE-BX80-SM1550S Transceivers are a high performance, cost effective module which have a single SC optics interface. They are compatible with the Small Form Factor Pluggable Multi-Sourcing Agreement (MSA) and Digital diagnostics functions are available via the 2-wire serial bus specified in SFF-8472. The receiver section uses a PIN receiver and the transmitter uses a 1550 nm DFB laser, up to 22dB link budge ensure this module 1000Base-EX Ethernet 80km application.
-
Product details
Part No. Data
RateWavelength Distance Output Power Sensitivity Connector Voltage DDM GE-SX-MM850 1.25G 850nm 550m -9~-3dBm ≤-18dBm LC 3.3V Yes GE-SX-MM1310 1.25G 1310nm 2km -9~-3dBm ≤-18dBm LC 3.3V Yes GE-LX10-SM1310 1.25G 1310nm 10km -9~-3dBm ≤-24dBm LC 3.3V Yes GE-LX20-SM1310 1.25G 1310nm 20km -9~-3dBm ≤-24dBm LC 3.3V Yes GE-LX40-SM1310 1.25G 1310nm 40km -2~+3dBm ≤-24dBm LC 3.3V Yes GE-LX40-SM1550 1.25G 1550nm 40km -5~0dBm ≤-24dBm LC 3.3V Yes GE-LX60-SM1550 1.25G 1550nm 60km -2~+3dBm ≤-24dBm LC 3.3V Yes GE-LX80-SM1550 1.25G 1550nm 80km -2~+3dBm ≤-24dBm LC 3.3V Yes GE-LX100-SM1550 1.25G 1550nm 100km 0~+5dBm ≤-32dBm LC 3.3V Yes GE-LX120-SM1550 1.25G 1550nm 120km 0~+5dBm ≤-32dBm LC 3.3V Yes GE-LX150-SM1550 1.25G 1550nm 150km 1~6dBm <-33.0dBm LC 3.3V Yes GE-BX03-SM1310 1.25G Tx1310nm/Rx1550nm 3km -9~-3dBm ≤-21dBm LC 3.3V Yes GE-BX03-SM1550 1.25G Tx1550nm/Rx1310nm 3km -9~-3dBm ≤-21dBm LC 3.3V Yes GE-BX03-SM1310S 1.25G Tx1310nm/Rx1550nm 3km -9~-3dBm ≤-21dBm SC 3.3V Yes GE-BX03-SM1550S 1.25G Tx1550nm/Rx1310nm 3km -9~-3dBm ≤-21dBm SC 3.3V Yes GE-BX10-SM1310 1.25G Tx1310nm/Rx1550nm 10km -9~-3dBm ≤-23dBm LC 3.3V Yes GE-BX10-SM1550 1.25G Tx1550nm/Rx1310nm 10km -9~-3dBm ≤-23dBm LC 3.3V Yes GE-BX10-SM1310S 1.25G Tx1310nm/Rx1550nm 10km -9~-3dBm ≤-24dBm SC 3.3V Yes GE-BX10-SM1550S 1.25G Tx1550nm/Rx1310nm 10km -9~-3dBm ≤-24dBm SC 3.3V Yes GE-BX20-SM1310 1.25G Tx1310nm/Rx1550nm 20km -9~-3dBm ≤-23dBm LC 3.3V Yes GE-BX20-SM1550 1.25G Tx1550nm/Rx1310nm 20km -9~-3dBm ≤-23dBm LC 3.3V Yes GE-BX20-SM1310S 1.25G Tx1310nm/Rx1550nm 20km -9~-3dBm ≤-24dBm SC 3.3V Yes GE-BX20-SM1550S 1.25G Tx1550nm/Rx1310nm 20km -9~-3dBm ≤-24dBm SC 3.3V Yes GE-BX40-SM1310 1.25G Tx1310nm/Rx1550nm 40km -2~+3dBm ≤-24dBm LC 3.3V Yes GE-BX20-SM1550 1.25G Tx1550nm/Rx1310nm 40km -2~+3dBm ≤-24dBm LC 3.3V Yes GE-BX60-SM1310 1.25G Tx1310nm/Rx1550nm 60km -2~+3dBm ≤-24dBm LC 3.3V Yes GE-BX60-SM1550 1.25G Tx1550nm/Rx1310nm 60km -2~+3dBm ≤-24dBm LC 3.3V Yes GE-BX80-SM1310 1.25G Tx1310nm/Rx1550nm 80km -2~+3dBm ≤-24dBm LC 3.3V Yes GE-BX80-SM1550 1.25G Tx1550nm/Rx1310nm 80km -2~+3dBm ≤-24dBm LC 3.3V Yes GE-BX120-SM1310 1.25G Tx1310nm/Rx1550nm 120km -1~+4dBm ≤-32dBm LC 3.3V Yes GE-BX120-SM1550 1.25G Tx1550nm/Rx1310nm 120km -1~+4dBm ≤-32dBm LC 3.3V Yes
-
Applications
-
Compitibility Test

Related Products
100G QSFP28 BiDi Transceiver 1271nm 1331nm 80km LC Simplex Single-Fiber
The 100Glight QSFP28-100G-BX80 is a 100 Gbps QSFP28 BiDi (bidirectional) optical transceiver for 100G Ethernet over a single strand of single-mode fiber, reaching up to 80 km with a simplex LC connector. It is deployed as a matched pair — a -D module (Tx 1271 / Rx 1331 nm) at one end and a -U module (Tx 1331 / Rx 1271 nm) at the other.Quick SpecificationsParameterValueData Rate100 Gbps (2 × 50G PAM4)Standard100G BiDi MSA (de-facto)WavelengthTx 1271 / Rx 1331 nm (-D), Tx 1331 / Rx 1271 nm (-U)ModulationPAM4Transmitter / ReceiverCooled EML / APDReach80 kmConnectorLC SimplexFiber TypeSMF (single strand)Tx Power+1 ~ +5 dBm (typical)Rx Sensitivity≤ -20 dBm (typical)Power Consumption< 4.5 WDDM/DOMYes (SFF-8636)Operating Temperature0 ~ 70 °CComplianceRoHS / CE / FCCWhat Is This Module?The 100Glight QSFP28-100G-BX80 is a 100 Gbps QSFP28 BiDi transceiver based on the 100G BiDi MSA. It transmits and receives 100 Gbps over a single strand of single-mode fiber using two wavelengths with PAM4 modulation (2 × 50G PAM4), reaching up to 80 km. A cooled EML transmitter and a high-sensitivity APD receiver extend the reach beyond the 40 km BX40 model. The -D and -U variants use complementary wavelength pairs and must be installed as matched pairs.Key Features100 Gbps full-duplex Ethernet (2 × 50G PAM4)Hot-pluggable QSFP28 form factorSingle-fiber bidirectional transmission over two wavelengthsCooled EML transmitter with high-sensitivity APD receiver80 km reach over a single strand of single-mode fiberLC Simplex connector — halves your fiber requirementDigital Diagnostics Monitoring (DDM/DOM) per SFF-8636MSA-compliant, vendor-agnostic coding for 20+ switch brands100% tested before shippingTechnical SpecificationsParameterSpecificationData Rate100 Gbps (2 × 50G PAM4)Standard100G BiDi MSA (de-facto)Wavelength (-D)Tx 1271 nm / Rx 1331 nmWavelength (-U)Tx 1331 nm / Rx 1271 nmModulationPAM4Transmitter TypeCooled EML LaserReceiver TypeAPD PhotodiodeReach80 kmConnectorLC SimplexFiber TypeSMF (single strand)Tx Optical Power+1 ~ +5 dBm (typical)Rx Sensitivity≤ -20 dBm (typical)Power Consumption< 4.5 WSupply Voltage3.3 VDDM/DOMYes (SFF-8636)Operating Temperature0 ~ 70 °CStorage Temperature-40 ~ 85 °CRelative Humidity5% ~ 95% (non-condensing)ComplianceRoHS / CE / FCCCompatibility100G BiDi is an emerging MSA standard with no single dominant OEM part number. Each 100Glight module is coded at order time for your specific switch platform. Contact 100Glight with your switch model for the exact equivalent part number, or request generic coding for multi-vendor environments.Applications100G Ethernet over single-strand fiber where cabling is constrainedFiber-lean metro and regional links up to 80 kmService provider edge and long-haul connectivity100G links that avoid duplex fiber and MPO connectivityRegional backbone over single-strand plantStandards & Compliance100G BiDi MSA (de-facto / emerging standard)SFF-8636 and SFF-8679QSFP28 Multi-Source Agreement (MSA)RoHS, CE, and FCC compliantClass 1 laser safety (CDRH / IEC 60825)Quality & TestingEvery 100Glight transceiver passes a 5-step test process before shipping:Tx/Rx optical power and receiver sensitivity verified on calibrated equipmentFull-rate bit-error-rate (BER) test at 100 Gbps (PAM4)Compatibility burn-in on major switch platformsDDM/DOM monitoring verification per SFF-8636Visual and mechanical inspectionWhy Choose Compatible Over OEM?FactorOEM Module100Glight CompatiblePerformanceStandard MSA specIdentical, MSA-compliantCodingVendor-lockedPre-coded for your brandPriceFull list priceFactory-direct, fraction of costWarrantyVendor warranty100Glight warranty + engineering supportFlexibilityBrand-specificCross-vendor compatibleFAQWhat is the difference between BX40 and BX80?Both use 1271 / 1331 nm wavelength division with PAM4 over a single fiber strand, but BX80 extends the reach to 80 km using a higher-power cooled EML transmitter and a more sensitive APD receiver, where BX40 reaches 40 km.Do I need to buy BX80-D and BX80-U in pairs?Yes. The -D module (Tx 1271 / Rx 1331 nm) must pair with a -U module (Tx 1331 / Rx 1271 nm) at the opposite end. Installing two modules of the same type will not establish a link.What is the difference between 100G BiDi and 100G ZR4?100G ZR4 multiplexes four wavelengths over a duplex pair of single-mode fibers (LC duplex) for 80 km. 100G BiDi uses two wavelengths over a single fiber strand (LC simplex) — ideal when fiber is scarce or already single-strand.Why does 100G BiDi use PAM4 instead of NRZ?To fit 100 Gbps over just two wavelengths, 100G BiDi uses PAM4 modulation (2 bits per symbol), running 50G PAM4 per wavelength. Lower-rate BiDi (10G/25G) uses NRZ.What fiber do I need for 100G BiDi BX80?A single strand of single-mode fiber (OS1 or OS2) with a simplex LC connector. No duplex pair is required.What is the lead time and warranty?Standard units are in stock with short lead time, and all transceivers carry the 100Glight warranty with engineer-to-engineer tec
100G QSFP28 BiDi Transceiver 1271nm 1331nm 40km LC Simplex Single-Fiber
The 100Glight QSFP28-100G-BX40 is a 100 Gbps QSFP28 BiDi (bidirectional) optical transceiver for 100G Ethernet over a single strand of single-mode fiber, reaching up to 40 km with a simplex LC connector. It is deployed as a matched pair — a -D module (Tx 1271 / Rx 1331 nm) at one end and a -U module (Tx 1331 / Rx 1271 nm) at the other.Quick SpecificationsParameterValueData Rate100 Gbps (2 × 50G PAM4)Standard100G BiDi MSA (de-facto)WavelengthTx 1271 / Rx 1331 nm (-D), Tx 1331 / Rx 1271 nm (-U)ModulationPAM4Transmitter / ReceiverCooled EML / APDReach40 kmConnectorLC SimplexFiber TypeSMF (single strand)Tx Power0 ~ +5 dBm (typical)Rx Sensitivity≤ -18 dBm (typical)Power Consumption< 4 WDDM/DOMYes (SFF-8636)Operating Temperature0 ~ 70 °CComplianceRoHS / CE / FCCWhat Is This Module?The 100Glight QSFP28-100G-BX40 is a 100 Gbps QSFP28 BiDi transceiver based on the 100G BiDi MSA. It transmits and receives 100 Gbps over a single strand of single-mode fiber using two wavelengths with PAM4 modulation (2 × 50G PAM4), reaching up to 40 km. A cooled EML transmitter and a high-sensitivity APD receiver extend the reach beyond the 20 km BX20 model. The -D and -U variants use complementary wavelength pairs and must be installed as matched pairs.Key Features100 Gbps full-duplex Ethernet (2 × 50G PAM4)Hot-pluggable QSFP28 form factorSingle-fiber bidirectional transmission over two wavelengthsCooled EML transmitter with high-sensitivity APD receiver40 km reach over a single strand of single-mode fiberLC Simplex connector — halves your fiber requirementDigital Diagnostics Monitoring (DDM/DOM) per SFF-8636MSA-compliant, vendor-agnostic coding for 20+ switch brands100% tested before shippingTechnical SpecificationsParameterSpecificationData Rate100 Gbps (2 × 50G PAM4)Standard100G BiDi MSA (de-facto)Wavelength (-D)Tx 1271 nm / Rx 1331 nmWavelength (-U)Tx 1331 nm / Rx 1271 nmModulationPAM4Transmitter TypeCooled EML LaserReceiver TypeAPD PhotodiodeReach40 kmConnectorLC SimplexFiber TypeSMF (single strand)Tx Optical Power0 ~ +5 dBm (typical)Rx Sensitivity≤ -18 dBm (typical)Power Consumption< 4 WSupply Voltage3.3 VDDM/DOMYes (SFF-8636)Operating Temperature0 ~ 70 °CStorage Temperature-40 ~ 85 °CRelative Humidity5% ~ 95% (non-condensing)ComplianceRoHS / CE / FCCCompatibility100G BiDi is an emerging MSA standard with no single dominant OEM part number. Each 100Glight module is coded at order time for your specific switch platform. Contact 100Glight with your switch model for the exact equivalent part number, or request generic coding for multi-vendor environments.Applications100G Ethernet over single-strand fiber where cabling is constrainedFiber-lean metro and campus links up to 40 kmService provider edge connectivity100G links that avoid duplex fiber and MPO connectivityRegional backbone over single-strand plantStandards & Compliance100G BiDi MSA (de-facto / emerging standard)SFF-8636 and SFF-8679QSFP28 Multi-Source Agreement (MSA)RoHS, CE, and FCC compliantClass 1 laser safety (CDRH / IEC 60825)Quality & TestingEvery 100Glight transceiver passes a 5-step test process before shipping:Tx/Rx optical power and receiver sensitivity verified on calibrated equipmentFull-rate bit-error-rate (BER) test at 100 Gbps (PAM4)Compatibility burn-in on major switch platformsDDM/DOM monitoring verification per SFF-8636Visual and mechanical inspectionWhy Choose Compatible Over OEM?FactorOEM Module100Glight CompatiblePerformanceStandard MSA specIdentical, MSA-compliantCodingVendor-lockedPre-coded for your brandPriceFull list priceFactory-direct, fraction of costWarrantyVendor warranty100Glight warranty + engineering supportFlexibilityBrand-specificCross-vendor compatibleFAQWhat is the difference between BX20 and BX40?Both use 1271 / 1331 nm wavelength division with PAM4 over a single fiber strand, but BX40 extends the reach to 40 km using a cooled EML transmitter and a more sensitive APD receiver, where BX20 reaches 20 km.Do I need to buy BX40-D and BX40-U in pairs?Yes. The -D module (Tx 1271 / Rx 1331 nm) must pair with a -U module (Tx 1331 / Rx 1271 nm) at the opposite end. Installing two modules of the same type will not establish a link.What is the difference between 100G BiDi and 100G ER4?100G ER4 multiplexes four wavelengths over a duplex pair of single-mode fibers (LC duplex) for 40 km. 100G BiDi uses two wavelengths over a single fiber strand (LC simplex) for 10–40 km — ideal when fiber is scarce or already single-strand.Why does 100G BiDi use PAM4 instead of NRZ?To fit 100 Gbps over just two wavelengths, 100G BiDi uses PAM4 modulation (2 bits per symbol), running 50G PAM4 per wavelength. Lower-rate BiDi (10G/25G) uses NRZ.What fiber do I need for 100G BiDi BX40?A single strand of single-mode fiber (OS1 or OS2) with a simplex LC connector. No duplex pair is required.What is the lead time and warranty?Standard units are in stock with short lead time, and all transceivers carry the 100Glight warranty with engineer-to-engineer technical support.
100G QSFP28 BiDi Transceiver 1271nm 1331nm 20km LC Simplex Single-Fiber
The 100Glight QSFP28-100G-BX20 is a 100 Gbps QSFP28 BiDi (bidirectional) optical transceiver for 100G Ethernet over a single strand of single-mode fiber, reaching up to 20 km with a simplex LC connector. It is deployed as a matched pair — a -D module (Tx 1271 / Rx 1331 nm) at one end and a -U module (Tx 1331 / Rx 1271 nm) at the other.Quick SpecificationsParameterValueData Rate100 Gbps (2 × 50G PAM4)Standard100G BiDi MSA (de-facto)WavelengthTx 1271 / Rx 1331 nm (-D), Tx 1331 / Rx 1271 nm (-U)ModulationPAM4Transmitter / ReceiverEML / APDReach20 kmConnectorLC SimplexFiber TypeSMF (single strand)Tx Power0 ~ +4 dBm (typical)Rx Sensitivity≤ -15 dBm (typical)Power Consumption< 3.5 WDDM/DOMYes (SFF-8636)Operating Temperature0 ~ 70 °CComplianceRoHS / CE / FCCWhat Is This Module?The 100Glight QSFP28-100G-BX20 is a 100 Gbps QSFP28 BiDi transceiver based on the 100G BiDi MSA. It transmits and receives 100 Gbps over a single strand of single-mode fiber using two wavelengths with PAM4 modulation (2 × 50G PAM4), reaching up to 20 km. Higher launch power and a more sensitive APD receiver extend the reach beyond the 10 km BX10 model. The -D and -U variants use complementary wavelength pairs and must be installed as matched pairs.Key Features100 Gbps full-duplex Ethernet (2 × 50G PAM4)Hot-pluggable QSFP28 form factorSingle-fiber bidirectional transmission over two wavelengthsEML transmitter with high-sensitivity APD receiver20 km reach over a single strand of single-mode fiberLC Simplex connector — halves your fiber requirementDigital Diagnostics Monitoring (DDM/DOM) per SFF-8636MSA-compliant, vendor-agnostic coding for 20+ switch brands100% tested before shippingTechnical SpecificationsParameterSpecificationData Rate100 Gbps (2 × 50G PAM4)Standard100G BiDi MSA (de-facto)Wavelength (-D)Tx 1271 nm / Rx 1331 nmWavelength (-U)Tx 1331 nm / Rx 1271 nmModulationPAM4Transmitter TypeEML LaserReceiver TypeAPD PhotodiodeReach20 kmConnectorLC SimplexFiber TypeSMF (single strand)Tx Optical Power0 ~ +4 dBm (typical)Rx Sensitivity≤ -15 dBm (typical)Power Consumption< 3.5 WSupply Voltage3.3 VDDM/DOMYes (SFF-8636)Operating Temperature0 ~ 70 °CStorage Temperature-40 ~ 85 °CRelative Humidity5% ~ 95% (non-condensing)ComplianceRoHS / CE / FCCCompatibility100G BiDi is an emerging MSA standard with no single dominant OEM part number. Each 100Glight module is coded at order time for your specific switch platform. Contact 100Glight with your switch model for the exact equivalent part number, or request generic coding for multi-vendor environments.Applications100G Ethernet over single-strand fiber where cabling is constrainedFiber-lean data center leaf-spine interconnects up to 20 kmCampus and metro inter-building linksService provider edge connectivity100G links that avoid duplex fiber and MPO connectivityStandards & Compliance100G BiDi MSA (de-facto / emerging standard)SFF-8636 and SFF-8679QSFP28 Multi-Source Agreement (MSA)RoHS, CE, and FCC compliantClass 1 laser safety (CDRH / IEC 60825)Quality & TestingEvery 100Glight transceiver passes a 5-step test process before shipping:Tx/Rx optical power and receiver sensitivity verified on calibrated equipmentFull-rate bit-error-rate (BER) test at 100 Gbps (PAM4)Compatibility burn-in on major switch platformsDDM/DOM monitoring verification per SFF-8636Visual and mechanical inspectionWhy Choose Compatible Over OEM?FactorOEM Module100Glight CompatiblePerformanceStandard MSA specIdentical, MSA-compliantCodingVendor-lockedPre-coded for your brandPriceFull list priceFactory-direct, fraction of costWarrantyVendor warranty100Glight warranty + engineering supportFlexibilityBrand-specificCross-vendor compatibleFAQWhat is the difference between BX10 and BX20?Both use 1271 / 1331 nm wavelength division with PAM4 over a single fiber strand, but BX20 extends the reach to 20 km using higher launch power and a more sensitive APD receiver, where BX10 reaches 10 km.Do I need to buy BX20-D and BX20-U in pairs?Yes. The -D module (Tx 1271 / Rx 1331 nm) must pair with a -U module (Tx 1331 / Rx 1271 nm) at the opposite end. Installing two modules of the same type will not establish a link.What is the difference between 100G BiDi and 100G ER4?100G ER4 multiplexes four wavelengths over a duplex pair of single-mode fibers (LC duplex) for 40 km. 100G BiDi uses two wavelengths over a single fiber strand (LC simplex) for 10–20 km — ideal when fiber is scarce or already single-strand.Why does 100G BiDi use PAM4 instead of NRZ?To fit 100 Gbps over just two wavelengths, 100G BiDi uses PAM4 modulation (2 bits per symbol), running 50G PAM4 per wavelength. Lower-rate BiDi (10G/25G) uses NRZ.What fiber do I need for 100G BiDi BX20?A single strand of single-mode fiber (OS1 or OS2) with a simplex LC connector. No duplex pair is required.What is the lead time and warranty?Standard units are in stock with short lead time, and all transceivers carry the 100Glight warranty with engineer-to-engineer technical support.
100G QSFP28 CWDM4 Transceiver 100GBASE-CWDM4 1310nm 2km LC Duplex Cisco QSFP-100G-CWDM4-S Compatible
The 100Glight QSFP28-100G-CWDM4 is a 100 Gbps QSFP28 optical transceiver for 100GBASE-CWDM4 Ethernet over single-mode fiber, reaching up to 2 kilometers with an LC duplex connector — an MSA-compliant, drop-in replacement for the Cisco QSFP-100G-CWDM4-S and equivalent vendor-locked optics.Quick SpecificationsParameterValueData Rate103.125 Gbps (4 × 25.78125 Gbps)Standard100GBASE-CWDM4 (IEEE 802.3bm / CWDM4 MSA)Wavelength1271 / 1291 / 1311 / 1331 nm (CWDM)Transmitter / ReceiverDFB / PIN (×4)Reach2 kmConnectorLC DuplexFiber TypeSMF (OS1 / OS2)Tx Power-6.5 ~ +2.5 dBm (per lane)Rx Sensitivity≤ -11.5 dBm (per lane)Power Consumption< 3.5 WDDM/DOMYes (SFF-8636)Operating Temperature0 ~ 70 °CComplianceRoHS / CE / FCCWhat Is This Module?The 100Glight QSFP28-100G-CWDM4 is a 100 Gbps QSFP28 transceiver built to the 100GBASE-CWDM4 standard (IEEE 802.3bm / CWDM4 MSA). It multiplexes four 25.78125 Gbps CWDM wavelengths (1271, 1291, 1311, and 1331 nm) onto a single pair of single-mode fibers, reaching up to 2 kilometers using low-cost uncooled DFB lasers. Designed as a direct replacement for vendor-locked OEM optics, it delivers identical performance and reliability at factory-direct pricing, with no coding lock-out.Key Features100 Gbps aggregate (4 × 25.78125 Gbps) 100GBASE-CWDM4 EthernetHot-pluggable QSFP28 form factorFour CWDM wavelengths (1271 / 1291 / 1311 / 1331 nm)Uncooled DFB transmitter array with PIN receiver array2 km reach over single-mode fiberLC Duplex connector — only two fibers requiredDigital Diagnostics Monitoring (DDM/DOM) per SFF-8636Lower cost and power than 100G LR4MSA-compliant, vendor-agnostic coding for 20+ switch brands100% tested before shippingTechnical SpecificationsParameterSpecificationData Rate103.125 Gbps (4 × 25.78125 Gbps)Standard100GBASE-CWDM4 (IEEE 802.3bm / CWDM4 MSA)Wavelength1271 / 1291 / 1311 / 1331 nm (CWDM)Number of Lanes4Transmitter TypeUncooled DFB ArrayReceiver TypePIN Photodiode ArrayReach2 kmConnectorLC DuplexFiber TypeSMF (OS1 / OS2)Tx Optical Power (per lane)-6.5 ~ +2.5 dBmRx Sensitivity (per lane)≤ -11.5 dBmExtinction Ratio> 3.5 dBPower Consumption< 3.5 WSupply Voltage3.3 VDDM/DOMYes (SFF-8636)Operating Temperature0 ~ 70 °CStorage Temperature-40 ~ 85 °CRelative Humidity5% ~ 95% (non-condensing)ComplianceRoHS / CE / FCCCompatibilityBrandOEM Part NumberCiscoQSFP-100G-CWDM4-SHuaweiQSFP-100G-CWDM4JuniperJNP-QSFP-100G-CWDM4AristaQSFP-100G-CWDM4Aruba / HPEJL285AFinisarFTLC1156RGPLEach 100Glight QSFP28-100G-CWDM4 is pre-coded to be recognized by your specific switch platform, including Cisco, Huawei, Juniper, Arista, Aruba/HPE, Dell, H3C, and other major brands. Generic or custom coding is also available for multi-vendor environments.Applications100G Ethernet in data center leaf-spine interconnectsInter-rack and inter-row links up to 2 kmCampus and building-to-building connectivityHigh-density data center aggregation100G storage area networksStandards & ComplianceIEEE 802.3bm (100GBASE-CWDM4)CWDM4 Multi-Source Agreement (MSA)SFF-8436 and SFF-8636QSFP28 Multi-Source Agreement (MSA)RoHS, CE, and FCC compliantClass 1 laser safety (CDRH / IEC 60825)Quality & TestingEvery 100Glight transceiver passes a 5-step test process before shipping:Tx/Rx optical power and receiver sensitivity verified on calibrated equipmentFull-rate bit-error-rate (BER) test on all four lanes at 25.78125 GbpsCompatibility burn-in on Cisco / Huawei / Juniper / Arista switch platformsDDM/DOM monitoring verification per SFF-8636Visual and mechanical inspectionWhy Choose Compatible Over OEM?FactorOEM Module100Glight CompatiblePerformanceStandard MSA specIdentical, MSA-compliantCodingVendor-lockedPre-coded for your brandPriceFull list priceFactory-direct, fraction of costWarrantyVendor warranty100Glight warranty + engineering supportFlexibilityBrand-specificCross-vendor compatibleFAQWhat is the difference between 100G CWDM4 and 100G LR4?Both multiplex four wavelengths over an LC duplex single-mode pair, but they use different wavelength plans: CWDM4 uses CWDM (1271–1331 nm) with uncooled DFB lasers for 2 km, while LR4 uses LAN-WDM (1295–1310 nm) with EML lasers for 10 km. CWDM4 is the lower-cost option for shorter data center links.Why is 100G CWDM4 cheaper than 100G LR4?CWDM4 uses uncooled DFB lasers and wider wavelength spacing, which simplifies manufacturing and thermal management compared to LR4's cooled EML lasers. This makes CWDM4 the most economical 100G single-mode option for links up to 2 km.What fiber do I need for 100GBASE-CWDM4?Single-mode fiber (OS1 or OS2) with a standard LC duplex connector. The module reaches up to 2 kilometers.Does the QSFP-100G-CWDM4-S work in Cisco switches?Yes. Each module is pre-coded with Cisco compatibility and validated on Cisco Nexus platforms before shipping.Can 100G CWDM4 be broken out to four 25G links?No. Because the four lanes are wavelength-multiplexed onto a single fiber pair (not parallel fibers), 100GBASE-CWDM4 cannot be broken out. Use 100GBASE-SR4 with an MPO fan-o
Quality Certification
Please contact us to download the certification certificate.
Please Note: Installing a third party transceiver does not void your network equipment warranty. Network equipment manufacturers all have guidelines stating that warranty supportontheirproductswillnotbeaffected.
Questions & Answers
Q20: How to contact the brand for order-related issues?
A20: For order inquiries and status updates, please contact our official customer service directly with your order information for quick assistance.
Q19: What exclusive services are provided to cooperative customers?
A19: Cooperative customers enjoy full-range services including dedicated consultation, technical guidance, after-sales support and real-time information updates.
Q18: How can I get support for product usage problems?
A18: For product usage and technical questions, you can get professional support through our official hotline, online consultation or message system.
Q17: What are the quality guarantee and after-sales policy?
A17: We implement strict quality control and provide official quality assurance. We follow a unified after-sales policy to offer customers reliable and complete support.
Q16: Does the brand support OEM/ODM customization?
A16: With a mature operating system of 23 years, we support OEM/ODM cooperation and provide customized production and solutions based on customer requirements.
Online Message















